Free Cool Systems

Atmospheric Water Generator

How Free Cool Atmospheric Water Generators work

The Free Cool; machine first pulls air through an electrostatic filter, removing 93% of all air born particles.
A condensation unit receives this clean humid airflow and condenses water vapor into liquid.
As the machine collects the water, it drops into a collection tray and immediately passes into Ultraviolet (UV) light, where the water stays in contact with UV rays for approximately 30 minutes. This kills over 90% of all germs and bacteria in the water.
The water is then pumped through a sediment screen and then through 2 solid block activated carbon (SBAC) 1 micron filters, which removes over 90% of any volatile organic chemicals (VOCs) that may be in the water.
The water is then filtered through AWS's proprietary ultrafiltration (UF) membrane, with a pore size of .015 micron, to remove virtually all bacteria and common viruses.
The water is then pumped into a reservoir tank.
From the reservoir tank, the water is recycled every 30 minutes through the UV and back into the reservoir tank.
The water is then chilled or heated and dispensed at the consumer's convenience.

The Free Cool Technology:

This revolutionary technology is helping to meet the growing demand for economical, good tasting, quality drinking water.
Atmospheric water generation is a green friendly, alternative water source, for anyone who wishes to maintain control over their own pure water supply. The Free Cool has been designed to perform at optimum levels, producing high quality water while consuming minimal electricity.

Water produced by the Free Cool water generation machine is pure and safe for human consumption and exceeds the established U.S. and international Public Health standards, including NSF 53, which is the top U.S. benchmark for drinking water. The NSF 53 standard requires the removal of volatile organic chemicals. VOCs such as ether, which have proven extremely difficult to remove by filtration methods of the past, are not present in the water generated by the Free Cool water generation machine.

Free Cool Features:

The Free Cool represents our newest model of quality atmospheric water generation technology. The complete set of features of the Free Cool set it apart from any other machine available in the marketplace today. This hot/cold machine features superior logic, easy to read LCD display, and low energy consumption. With its municipal tap-in feature, the Free Cool is perfect for environments where temperature and humidity are seasonal. Our superior filter system ensures that the water dispensed is filtered through high quality filters, including one carbon filter, one sediment filter, a second carbon filter, a no waste RO filter or an ultra-filtration (with no-waste bypass), and a third carbon filter. The water is treated by two inline UV lamps and is re-circulated to ensure fresh tasting water when you need it. Re-circulation of all water in the system takes place every 90 minutes for 10 minutes using two separate re-circulation systems with individual UV lamps. Because the hot and cold water tanks use the latest coil technology the Free Cool uses less energy overall to provide you with hot and cold water on demand (see our detailed specifications below). Combined with its no-waste RO system (or optional ultra-filtration filter), the Free Cool represents the most fully featured and thoroughly thought through AWG design ever built.

Water Filtration system: 4 filters and 2 x UV lights.

Water Flow from the collection tank: Sediment filter, Carbon filter 1, Reverse Osmosis, Carbon filter 2, then the 1st UV Light. Additional UV light for cold water: All cold water is additionally sanitized by passing the water through a 2nd UV light.

Recycle Mode: Sanitizes water in top storage tank on power up and every 12 hours during normal operation by passing the water through the cold water UV Light and then back into the storage tank for 2 minutes.

2 speed fan: A 2 speed fan is used to allow the dealer or end user to select between maximum water production, or a quieter operation mode. The switch is on the back of the unit.

Quiet Operation Sound: measures less than 50dB maximum sound level (measured 1ft from the unit, when generating water).

Municipal Water Mode: Municipal water mode is designed to provide additional water source if atmospheric water generation cannot keep up with demand. Municipal water requires an external pre-filter kit to maintain water quality vs. atmospheric water.

Note: Without a pre-filter, all of the standard filters, especially the Reverse Osmosis filter life will be much shorter.

If an external water source is present, and the Relative Humidity is above 40%. Any time the collection tank is empty, the unit will fill the collection tank from the external water source (takes about 1 min), and then shut off the external water source, and resume Atmospheric water production.

If an external water source is present, and the Relative Humidity is below 40%. Any time the collection tank is empty, the unit will fill the collection tank from the external water source (takes about 1 min), and then shut off the external water source. Atmospheric water production will resume if the R/H goes above 40%.

Hot Water Child Lock: Hot Water will only be dispensed if the Child Lock button is pressed before the Hot Water Button. The system resets after each use, or if no Hot water is dispensed for 30 seconds. The unit sounds a long warning tone if the Hot Water button is pressed without first pressing the Child Lock button. This can remind an adult to engage the Child Lock, or warn that a child is playing with the machine.

Filter Replacement Warning: The unit will remind the end user to replace each filter as required. Filter replacement timers can be reset at any time, if the filters are replaced early. The Sediment, and 2x Carbon filters should be replaced every 6 months, and the Reverse Osmosis filter every 12 months. The filters are accessible from the front of the machine, have quick disconnect connectors, and the front panel is easily removed to facilitate filter replacement.

Free Cool User Interface Liquid Crystal Display: The unit displays the current status of the machine with full animation on the front panel color LCD. Displays include Atmospheric water generation, filtering the water, dispensing Hot or Cold Water, Hot and Cold water tank temp, Heater and Cooler Status, UV Light Status / Failure, filter replacement, leak sensor, defrost sensor, the level of water in the collection tank and storage tank, etc.

All button presses respond with an acknowledgement tone and where appropriate, mode change on the LCD, or a long warning tone if the requested operation cannot be performed.

Membrane-filtered, UV-purified and treated cold water . . . generated from thin air
digitally controlled heating and cooling elements which maintains precise hot and cold water temperature
Easy connection to a tap water supply for filtered water on demand.
Fully automated
Superior Reliability and Dependability
Minimal servicing and refurbishment costs
Stainless steel reservoir
LED Display
Complete diagnostic control board with multiple redundant safety systems

Pollution in Our Drinking Water

Recently the Environmental Protection Agency (EPA), the Center for Disease Control (CDC) and other environmental groups have commented on the shocking and dangerous state of public water supplies. They have said that the water quality in many of our public water supplies is being degraded by chemical, biological, and physical contaminants. Drinking ordinary tap water can be potentially fatal to people with a weakened immune system. Children, expectant mothers and the elderly are in greatest risk.

As the news of this water crisis has spread, there has been an explosive worldwide growth in the sales of both bottled water and filtering devices, There is however, no assurance that bottled water is safe; and furthermore, of the over 2,000 different filter models sold to the public, only a handful actually remove all of the parasites, viruses, bacteria, pesticides and heavy metals that may be present in tap water. Cryptosporidium Parvum, for example is one of the protozoa, which most water systems are incapable of removing. This is the same parasite that killed 104 people and made 400,000 ill in Milwaukee.

The Natural Resources Defense Council estimates that in the US alone . . . more than 900,000 people become ill each year from water borne disease . . . and as many as 900 will die. As bad as the situation is in the United States, it is worse in many other developed countries and to an even greater degree, second and third-world countries.

Continually, on any given day, more than 1/2 of the earth's human population is ill, with the majority of these cases caused by waterborne contaminants. The World Health Organization of the United Nations estimates that 80% of this illness is caused by contaminated drinking water. Many countries throughout the world, not just third world countries, have inadequate water treatment facilities, or a complete lack of treatment facilities.

It is becoming clear that new technologies are needed in every segment of the water treatment industry: agriculture, horticulture, food processing, industrial waste treatment, public water supplies, and sewage treatment. These systems must be environmentally-friendly and rely on methods and processes that are not chemically based.

Atmospheric Water Generators

Fortunately, there is a new technology that offers a remarkable solution to the global water crisis.

Free Cool; has introduced the FRW100HK - - - an atmospheric water generator (FCAWG) which utilizes a revolutionary patented technology to convert ambient atmospheric water vapor into potable water. In other words The FRW100HK produces pure drinking water . . . out of thin air.

Designed with Free Cool advanced proprietary ultrafiltration membrane technology, the FRW100HK extracts, filters, treats and purifies water . . . all from the air we breathe . . . providing pristine, sparkling clear water in the purest form - much like crystal-like dew found only on the purest mountain tops.

The Free Cool Atmospheric Water Generator is a humidity and temperature driven machine. This means the machine totally depends on the level of humidity in the air and the temperature to produce water. Ideally, the humidity level should be at least 40% or above to achieve the machine's optimum performance. In places with lower humidity level, the machine will still produce water but not as quickly, nor as much as in places with high level of humidity. In the house environment, higher level of humidity tends to be around the kitchen area, near an open window or in more spacious rooms. Units also perform well in an air-conditioned room, but it is recommended to open the window at night to make the room ventilated.

The machine also depends on the temperature to operate at its’ optimum level. The ideal temperature is 65o F or above. Because your Corporation Atmospheric Water Generator works by converting the humidity in the air to water, this unit also acts as an effective dehumidifier. In areas with high humidity, the Free Cool Atmospheric Water Generator not only acts as a good water generator, but also a perfect dehumidifier to keep you healthy and ensure your home appliances a long service time.

How It Works

Atmospheric Water Generator